Paint providing anti-slip effect on floors

Methyl methacrylate resin-based, one-component, high resistance to abrasion and friction. Fast drying . The adherence is strong. It is resistant to meteorological conditions. Easy to apply. It is a floor paint that provides an anti-slip effect on the surface.

AREAS OF USE and FEATURES :  It is very long lasting. It adheres to the applied surface in maximum. It dries fast. The floor can be opened to pedestrian and / or vehicle traffic 1-3 hours after application. It has maximum resistance against UV and other meteorological conditions, impacts and abrasions caused by pedestrian and vehicle traffic, stacking machines such as forklift and pallet truck. Some people are unaffected by legal, exhaust and oil-based factors. It has a thermoplastic flexing ability that allows it to work with the bottom surface. Asphalt, concrete, helicopter concrete, concrete with surface hardener, Ceramic, Granite, mosaic, paledian, eposi etc. It can be used easily on surfaces. Open and closed areas of fuel stations, shopping malls, schools, sports fields, offices, residences and shopping malls.It can be easily used in car parks, Shipment and Parking ramps, factory walkways, forklift roads and goods acceptance ramps, aircraft hangars, and any kind of ground where anti-slip effect is required. Thanks to its special aggregates and strong chemical components, ZBS Floor Anti-Slip Paint has been specially developed and improved to create teeth on the floor and provide non-slip properties on the floor. We can produce any color you want with 299 color options.  

PLEASE CLICK FOR KARTELA

APPLICATION METHOD:  It is very simple to apply. You can easily apply it yourself. No extra labor is required. We ship our product to you ready for use. All dirt and oil on the application surface will be cleaned and the surface; should be made clean, dust-free and dry. If there are areas such as cracks, crevices or fillings on the floor that require filling , it should be corrected and / or filled with ZBS 2K Floor Repair Putty . If you have a very bright and smooth surface, For example, ceramic, granite, paledene, glossy epoxy etc., before starting the application, our ZBS Glossy Surface Transition Primer product should be applied as a single coat on the floor to create the appropriate adherence floor .

In some concrete floors, dusting occurs due to micron particles that constantly break off the ground as they are swept or cleaned. If you have this type of powdered concrete surface, you must first apply our ZBS AntiToz product to the floor and end the dusting . Thus,  a suitable adherence (adhesion) surface is created for ZBZ Floors Non-Slip Paint . The application area should have good ventilation. A mask should be used during application. ZBS Floor Anti-Slip Paint is mixed homogeneously for about 5 minutes with a low speed mixer and applied with roller brush and spatula to the application area.

The aggregates and strong chemical components of our ZBS Floating Non-Slip Paint are sufficient for non-slip. If you want a stronger anti-slip effect; we can manufacture the product more intensely. In this case, it should be remembered that the consumption will increase. Application should not be done in very cold or very hot weather, (19 - 30) under excessive sun and in excessive windy weather.

In order to create a protective effect on the floor in order to prolong the life of the application and maximize these values ​​against late contamination, easy cleaning, impact resistance, friction resistance and meteorological conditions, you can  apply our ZBS Floor Guard product as a single coat on the floor .

Important NOTE: If your floor is wet or dry, if there is a ramp on the floor, according to the conditions such as the slope degree of this ramp, whether the request for non-slip is for the vehicle or pedestrian, or the weight of the surface and traffic in the ground conditions, our "ZBS Floor Anti-Slip Paint" product alone is sufficient. You can stay. In such a case,   it may be necessary to create teeth with a minimum thickness of 3mm or more on the floor with our ZBS Double Component Floor Paint product. Our technical staff will guide you in the light of the information you give us about your ground structure.   

PHYSICAL AND CHEMICAL PROPERTIES

COLOR	PLEASE CLICK FOR KARTELA
VISCOSITY	84 - 88 KU (according to seasonal conditions)
DENSITY	1,5700 gr / cm3, Thinning is not done. It is applied directly.
KMM (%)	60
TIME TO DRY	Completes touch drying 25 minutes, 60-240 minutes. also hardens. (At 19-30 ° C, in a sunny open area)
APPLICATION TOOLS	Roller, brush, Spatula, Otoscope
CONSUMPTION I (Theoretical)	0,75-1,00 kg / m2 (It applies an average area of ​​30-20 m2 with 1 bucket of 20 kg.)
CONSUMPTION II (Theoretical)	1,20-1,50 kg / m² (implements an average area of ​​17-14 m2 with 1 bucket of 20 kg.)
PACKAGING SHAPE	20 Kg. / Metal Bucket, hoop cover
SHELF LIFE	2 years in dry / cool environment and original packaging, with the lid closed.
DANGER WARNINGS	R10: Keep out of the reach of children. R20 / 22: Harmful by inhalation and if swallowed. R52 / 53: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R65: Harmful if swallowed, may cause lung damage.
SAFETY NOTICES	S7: Keep in tightly closed container. S24 / 25: Avoid contact with eyes and skin S28: In case of contact with skin, wash immediately with plenty of water. S29: Do not empty into drains. S46: If swallowed, seek medical advice immediately and show the container or label.

ATTENTION PLEASE......

WHEN APPLICATION IN INDOOR AREAS, THE AREA MUST BE GOOD VENTILATED, USED A MASK AND DOES NOT STAY IN THE LONG TIME.

ATTENTION PLEASE......

In order to be more descriptive and understandable, you can click on the link for our question-answer text that we prepared by compiling from your questions. We are absolutely sure that you will find a relevant question on your ground from the questions and answers in this link. Therefore, we urge you to have information by examining our link.   : FREQUENTLY ASKED QUESTIONS