Ceramic, Granite, Paledian, Marble, Concrete, Natural stone, It is a product developed specially for the waterproofing problems we encounter on roofs, terraces, balconies, open or closed areas such as glossy or matte surfaces with decorative features. Water leaks from joints and cracks generally occur on such surfaces with the effects of time. Our product; Since it is transparent (transparent), it provides the waterproofing effect without damaging the visual effect and texture on the ground, without breaking and breaking the surface. It penetrates into the joint and capillary cracks formed on the surface, expands and closes the openings formed in these areas, allowing the water to remain on the surface. It can be used on horizontal and vertical surfaces. It does not slide and dust on the floor. It is not affected by the effects and wear of pedestrian and vehicle traffic that may occur on it. It breathes. It does not prevent humidity and air circulation from inside to outside, which we call internal diffusion. It can be used safely especially on open terraces. It is not affected by UV, sun corrosive effects and other meteorological conditions. 

If you wish, by applying ZBS FLOOR PAINT on it , it maximizes the protection of the ground and you can use it for many years by coloring it in any color you want with 299 color options. By clicking the link below, you can review our ZBS FLOOR PAINT product:

PLEASE CLICK FOR ZBS FLOOR PAINT 

SURFACE PREPARATION:  If there are cracked or broken parts on the application surface , it is repaired with ZBS 2K REPAIRING PASTE . In roof, terrace, balcony, open or closed area isolations, all corners and edges should  be beveled with ZBS 2K REPAIRING PASTE . It should not be forgotten that running water and running water isolations are different from each other. We mean that; If there are pits on the roof and terrace where water ponds, these zones can be mixed with cement based construction chemicals or ZBS 2K REPAIR PASTE.     It should be prevented from water ponding (continuous stopping) by filling with slope. Because standing water always damages your existing insulation and structure, shortening the life of your insulation. In the future, water leaks may occur from those regions over time. Before the application, there should be no oil, dirt, dust on the floor, which may prevent the product from being absorbed. It must be ensured that there is no moisture on the floor and in the concrete. If joints are broken or broken, joint joints must be renewed. Shield or displaced coatings should be removed and re-strengthened. When applying on the floors of roof and terrace concrete, it should be remembered that the beveling (filling) of the edges and corners will provide maximum isolation effect. Currently, if sealant and silicone applications are worn or destroyed, they are repaired and the surface is completely, It is made ready for insulation application. If the floor is washed, it must be left to dry and application should be done after making sure that it is completely dry. Because the surface becomes dry. However, since we cannot notice the moisture remaining in the concrete, the isolation effect does not occur exactly. Application should not be done in rainy and dry weather. 

APPLICATION: Before applying ZBS Shock Guard on the prepared surface, the product is mixed thoroughly, it is fed to the surface 2 times or more with the help of a brush or roller. If there is parepet wall and side walls in the application area, it should be applied vertically to the walls as 40 cm and bundling should be done. Thanks to its very thin and crystalline structure, it is rapidly absorbed by the ground and proceeds in concrete up to the smallest pores. Drying time can be extended up to 1-2 hours in closed areas for 2-3 hours (in open and sunny areas). The second layer is applied again with the same procedures and after 3-4 hours of curing, the application is terminated.

 ATTENTION PLEASE......

WHEN APPLICATION IN INDOOR AREAS, THE AREA MUST BE GOOD VENTILATED, USED A MASK AND DOES NOT STAY IN THE LONG TIME.

ATTENTION PLEASE......

In order to be more descriptive and understandable, you can click on the link for our question-answer text that we prepared by compiling from your questions. We are absolutely sure that you will find a relevant question on your ground from the questions and answers in this link. Therefore, we urge you to have information by examining our link.

FREQUENTLY ASKED QUESTIONS

PHYSICAL AND CHEMICAL PROPERTIES: