750 c0 Heat-resistant Paint

Synthetic and Silicone Resin Based Antimony trioxide is resistant to fire thanks to special resin additive. It can be safely applied on surfaces in contact with high temperature. It is used for painting chimney, oven and motor surfaces. New surfaces should be cleaned very well. If a thin coat is applied and a second coat is applied, the better results are obtained. Resistant to heat up to 700 c.

Excellent adhesion to concrete, wood and metal surfaces. Cracking spill does not swell. All kinds of walls and wooden surfaces inside the buildings. Steel constructions, especially in fire ladders, are used in places where there is a high risk of fire, such as hospital to school airport. Apply 2 coats. When the fire or heat source comes into contact with ZBS HEAT RESISTANT paint. The film layer interrupts heat and mass transfer to the main substrate. With the end of the burning materials will end in a fire. It does not carry flame in any way. When a material which is burned for 5 minutes during a fire is painted with ZBS HEAT RESISTANT paint, it takes 3–4 hours.

ZBS HEAT RESISTANT PAINT APPLICATION :

ZBS HEAT RESISTANT paint The surfaces to be applied must be completely cleaned of moisture, dirt, rust and old paint and sanded. It is ready to use and should be applied in layers. Wait at least 2 hours between coats. The temperature of the application surfaces must be above +5 C.

ZBS HEAT RESISTANT Paint Drying Time (18 C)

First drying: 1st hour. Second coat application: 2nd hour. Full hardening: 24. HOURS

TEST VIDEO OF ZBS HEAT RESISTANT PAINT (750Co FLAME IS GIVEN TO THE PRODUCT)

ZBS HEAT RESISTANT PAINT AFTER 750 CO AFTER COOLING TO 50 CO

THE PRODUCT IS BACK TO THE FIRST COLOR BROWN.

 ZBS HEAT RESISTANT Paint Safety Precautions: