ZBS HAMMERTON PAINT
Product Code :
CATEGORY : Floor Painting
Subcategory : ZBS EPOXY AND INDUSTRIAL PAINTS
Styrene alkyd based, air-drying topcoat with hammered metal appearance.
| PROPERTIES | It has a wide usage area because it easily closes the defects that may occur during metal work and gives a decorative appearance. Very good adhesion to bare metal and primed surfaces. It has a high water resistance due to the combination of binders. |
| usage areas | It is used in office equipments and machines, hand tools and workshop benches, electrical tools, elevator door and steel door manufacturing, etc. places. |
| METHOD OF APPLICATION | The surface to be applied should be cleaned from all kinds of oil, dust, dirt, rust and the surface should be wiped with ZBS Cellulosic Thinner. It is applied in two layers without applying primer to the metal surface. |
| THINNING RATE | ZBS Cellulosic thinner; should be thinned with 10 %15% thinner. |
| COATING POWER | 1 Lt. can be painted with approximately 10-12 m2 area |
| DRYING TIME | 20 ° C, 50% relative humidity |
| NO DUSTING | 5–10 minutes |
| TOUCH DRY | 20–30 minutes |
| HARD DRY | 1–2 hours |
| FLASH POINT | 35 ° C ± 2 (Keep away from fire . ) |
| PACKAGING SHAPE | Available in 20 Kg Metal Package |
|
DANGER WARNINGS |
R10 - R22 - R36 / 8 |
|
SAFETY WARNINGS |
S2 - S3 / 7/9 - S16 - S24 / 25 S29 - S36 / 37/39 - S51 |
