Product Code : IZOWALL PINTSNSYARN HEAT HIYAR HEB
CATEGORY : Floor Painting
Subcategory : ZBS PIPTYARN HIYAR
İZOWALL THERMAL HEAT INSULATION PAINT
It is a specially modified Elastomeric resin-based patterned thermal insulation coating consisting of natural beads that have been vacuumed through special processes.
DESCRIPTION: It is a specially modified Elastomeric resin-based, thermal insulation coating consisting of natural spheres that have been vacuumed through special processes.
FEATURES: It is water-based and provides heat, water and sound insulation and is fire resistant. It has high breathability.
APPLICATION SURFACES: It is used safely and guaranteed in coating all kinds of plaster, gross concrete, old painted interior and exterior facades and all kinds of roof, metal and wooden surfaces.
APPLICATION: All kinds of oil, dirt and dust should be cleaned and surface repaired should be applied. Isothermal Thermal Insulation Coating Application consists of 4 layers of application (1 layer of primer, 2 layers of coating and 1 coat of polish). Coating should be applied at least 2 hours after primer application. The material should be mixed homogeneously with the mixer or mechanical mixer before coating application. It is ready to use. Application with satin roller is recommended. During the application, the roll is completely immersed in the bucket and the material is provided to completely wrap the roll, the excess material in the roll is shaken and flowed into the bucket. It should be applied to the surface without pressing the roller and slowly. The material in the roll is about the width of the roll, It paints 80-90 cm surface from top to bottom. In this way, after painting about 2-3 m² of area, the surface should be combed from top to bottom and from right to left in order to spread completely to the surface and the pattern must be patterned from top to bottom in order to give the surface a pattern. The direction of the pattern must be in the same direction for a smooth surface appearance. At least 6 hours after the first coat application, the same application as the first coat should be done as the second coat application. At least 6 hours after the second coat application, Isothermal Insulation Polishing is applied and the surface gains bright appearance and protection against all kinds of external factors In this way, after painting about 2-3 m² area, the surface should be combed from top to bottom and from right to left in order to spread completely on the surface and the pattern must be patterned from top to bottom in order to give the surface a pattern. The direction of the pattern must be in the same direction for a smooth surface appearance. At least 6 hours after the first coat application, the same application as the first coat should be done as the second coat application. At least 6 hours after the second coat application, Isothermal Insulation Polishing is applied and the surface gains bright appearance and protection against all kinds of external factors In this way, after painting about 2-3 m² of area, the surface should be combed from top to bottom and from right to left in order to spread completely to the surface and the pattern must be patterned from top to bottom in order to give the surface a pattern. The direction of the pattern must be in the same direction for a smooth surface appearance. At least 6 hours after the first coat application, the same application as the first coat should be done as the second coat application. At least 6 hours after the second coat application, Isothermal Insulation Polishing is applied and the surface gains bright appearance and protection against all kinds of external factorsis commemorated.
WARNING: Before applying on metal surfaces, the surface must be protected against corrosion by anticorrosion.
TECHNICIAL SPECIFICATIONS:
Isothermal thermal insulation coating material; Silicates that are melted at 2200-2400 ° C
It consists of micron-sized silicate beads, which are inflated and leave stagnant air.
- These beads are UV resistant, Heat, Water, Sound, (high pitched sounds) insulation.
- Radiant Heat has reflective feature
- Your walls because it is a light material 1m² ' at about the 600-700g . Loads.
- In the first 5 to 10 years, the insulation value increases 10-15% , never decreases in value. However, in other systems; on the contrary, it loses its capability of 40-45% insulation after the first 4-5 years, and even loses its property without paying for the expenses.
- Other insulating materials accumulate on heat or cold and transfer it after reaching the saturation point, which causes a greenhouse effect in the environment by increasing the interior air and 40-50% more than the normal air temperature in the outer walls.
- However , it prevents this negativity due to its isothermal reflective feature.
- Classical applications do not breathe buildings. Isothermal breathing.
- Soft and light colors should be preferred on the exterior. Because of the dark colors, the fading process is fast and reduces the reflectivity feature.
- Average is 2mm in isothermal temperate regions . It is applied in color in thickness. 3 + 2mm in cold regions . It is applied in thickness ( iso-plus + isothermal ).
- Isothermal is a completely natural material. To the environment or people etc. There is no content harmful to health.
- Since it is natural, its resistance to natural conditions is very high. It is a product that will live with the building.
- If it is desired to change color or repaint after 10-15 years, it can be painted with all kinds of exterior paint. Or colored 1st layer isothermal heat insulation coating can be applied on it. The isothermal heat insulation coating starts to deform at 650 ° C , withstands temperatures up to 900 ° C , does not cause a fire that does not ignite.
- It is A-1 Flammability class.
- It stops moisture and moisture.
- Waterproof, waterproof value> 0.1 ' is.
- Isothermal heat insulation material does not contain carcinogenic or radioactive material.
- Isothermal thermal insulation coating is a water-based product and is completely natural .
| Brightness | Mat |
| Color | Click on the ZBS color chart for 300 different color options. |
| Solid Matter | 70 ± 2% (By Weight) |
| Density | 0,80 gr / cm³ |
| Application | Satin roll or spraying |
| Spray pressure | 40Bar / 580 psi |
| Nozzle Diameter | 0.021 ”- 0.027” |
| Flash point | Fireproof |
| Single Layer Dry Film Thickness | 1.5-2mm |
FOR CERTIFICATES, YOU CAN CLICK THE FOLLOWING LINKS:
TSE CERTIFICATE ISO QUALITY CERTIFICATE TÜRKAK ANALYSIS REPORT TECHNICAL TABLE
| CONSUMPTION | Consumption is 1.2-1.3 kg / m² according to the type, absorbency and structure of the application surface. A controlled sample study should be carried out for precise consumption consumption. |
| DRYING TIME (at 20 ° C, 65% HR | Touch dry: 2 hours, Second coat application: 6 hours, Final drying: 24 hours (drying time may increase at higher relative humidity and low temperature). |
| STORAGE: | It can be stored for 3 years in its unopened package, protected from frost and direct sunlight in a cool and dry place. Close the lid of the package so that it does not air immediately after use. |
|
DANGER and SAFETY WARNINGS |
R 43: May cause sensitization in skin contact. S 2: Keep out of the reach of children. S 23: Do not breathe vapor. S 24/25: Avoid contact with eyes and skin. S 37: Wear suitable gloves. S 46: If swallowed, seek medical advice immediately and show this container or label. S 56: Dispose of this material and its container in hazardous or special waste collection points. |
PLEASE CLICK THE FOLLOWING LINK FOR THE HEAT INSULATION TEST VIDEO OF OUR PRODUCT
PLEASE CLICK THE FOLLOWING LINK FOR OUR FIRE TEST VIDEO OF OUR PRODUCT:
CLICK THE FOLLOWING LINK FOR THE WATER ISOLATION TEST VIDEO OF OUR PRODUCT:
CLICK THE FOLLOWING LINK FOR THE SOUND INSULATION TEST VIDEO OF OUR PRODUCT:
PLEASE CLICK THE FOLLOWING LINK FOR THE FLEXIBLE TEST VIDEO OF OUR PRODUCT: